| PRODUCTION PROTOTYPE |
              SEEING IS BELIEVING. When engineering design finished, production prototypes are need to be made to assure the further batch production without any problems. As the final prototypes in design stage, the production prototypes should be made out of those material similar even exactly same as those of final products. It is necessary that implementing some important test on production prototypes, such as dropping, loading, heat resistance. As soon as the test passed, the product development would move to production preparation stage. So, material in this stage is very important, that is why CNC machining process used widely in this stage. RPWORLD can buy any material rods/blocks from local market or accept any special material from client, the sole aim is using right material to produce right prototype. CNC prototypes out of same thermoplastic material as ones of final products, can replace real products to pass the important test in advance, also can help designer confirm the production possibility before expensive injection mould invested. CNC prototypes out of true nonferrous metal or ferrous metal, can be used as final products without any difference comparing with ones from mass production. |
